|
YAPIŞKAN
BANTLAR
|
|
600mm
x 300mm 400mm X 220mm |
|
GÜVENLİK VERİLERİ / MSDS
001 PAGE 1
PRODUCT IDENTIFICATION: 101
MATERIAL SAFETY DATA SHEET
MSDS-001 PAGE 2
PRODUCT IDENTIFICATION
SECTION V. REACTIVITY DATA
Stable: avoid pH above 5.0 since there is the possibility of decomposition, and formation of organic vapors.
Materials to Avoid: Alkali and Alkaline compounds.
Hazardous Polymerization: Will not occur.
SECTION VI. HEALTH HAZARD DATA
Health Hazard (Acute and Chronic): A moderate irritant due to low pH. May cause skin reactions on prolonged exposure. Fumes may cause irritation of the upper respiratory tract on prolonged exposure.
Carcogenicity: None known.
Emergency and First Aid Procedures
Wash off with soap and water.
In case of Eye Contact: Wash eyes with water for 15 minutes, and see private physician if irritation persists.
SECTION VII. PRECAUTIONS FOR SAFE HANDLING & USE
Steps to be taken if substantial quantity of material is spilled: Keep area ventilated and flush with water.
Waste: Disposal: Normal sewage disposal.
Mild steel containers should be avoided.
Normal precautions in handling of chemicals should be followed. Rubber gloves advisable.
Safety goggles for e
eye protection advisable
SECTION III. PHYSICAL DATA
Boiling Point: Higher than 200° F. Sp. Gravity: 1.1
Solubility: Easily dispersible in water
Vapor Pressure: Same as water pH = 5.0
Appearance and Odor: Dark brown fluid with fishlike odor, plus a fruitlike fragrance.
SECTION IV. FIRE HAZARD
Flash Point: Greater than 200° Non-Flammable.
Extinguishing Media:: Dry Chemical Fire Extinguishers, Carbon Dioxide, or Polymer
|
